715c..dk... www.vishay.com vishay cera-mite revision: 30-jan-13 1 document number: 22168 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage class 2 ceramic dc disc capacitors, screw terminal mounting, 15 kv dc to 40 kv dc dielectric strength 150 % of rated voltage, charging current limited to 50 ma dissipation factor tan ? ? 20 x 10 -3 (1 khz) insulation resistance min. 200 000 m ? or 1000 ? f min. at 25 c corona limit < 5 pc at 50 % rated ac voltage operating temperature range - 30 c to + 85 c features ? class 2 ceramic (y5u) ? low inductance ? high insulation resistance ? epoxy coating ? screw terminal mounting ? ceramic singlelayer capacitor applications ? high voltage power supplies ?co 2 lasers ? x-ray equipment ? welding equipment ? industrial capacitance range 100 pf to 10 nf rated voltage (1) ?15 kv dc (5.3 kv rms ) ?20 kv dc (7.0 kv rms ) ?30 kv dc (10.6 kv rms ) ?40 kv dc (14.0 kv rms ) note (1) all kv rms up to 60 hz ceramic dielectric y5u (class 2) material capacitor elements made from class 3 ceramic in a molded epoxy case. screw terminals: brass, silver plated marking type designator, capacitance value, rated dc voltage, ceramic material code, produ ction date code, cera-mite logo power dissipation limit to 25 c rise above ambient, measured on case capacitance tolerances - 20 % to + 80 % quick reference data description value ceramic class 2 ceramic dielectric y5u type 715c15 dk### 715c20 dk### 715c30 dk### 715c40 dk### voltage (v dc ) 15 000 20 000 30 000 40 000 min. capacitance (pf) 1500 500 500 300 max. capacitance (pf) 10 000 6800 4700 3300 mounting screw terminal
715c..dk... www.vishay.com vishay cera-mite revision: 30-jan-13 2 document number: 22168 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in inches (millimeters) notes ? screw torque limit must be 12 inch pounds. use #8-32, 3/16" long sc rew to prevent bottoming ? m5 metric terminals available on request, consult factory ordering information 715c15dkd20 15 kv dc 2000 pf - 20 % to + 80 % y5u model rated voltage capacitance value tolerance ceramic sap part number, electrical, and dimensional data model ceramic capacitance values (pf) rated voltage (kv dc ) rated voltage (kv rms ) d max. h max. 715c15dk### 715c15dkd15 y5u 1500 15 5.3 26.7 (1.05) 22.9 (0.90) 715c15dkd20 2000 33.0 (1.30) 715c15dkd33 3300 39.4 (1.55) 715c15dkd47 4700 33.0 (1.30) 715c15dks10 10 000 45.7 (1.80) 715c20dk### 715c20dkt50 y5u 500 20 7.0 22.4 (0.88) 25.4 (1.00) 715c20dkd10 1000 33.0 (1.30) 715c20dkd13 1300 33.0 (1.30) 715c20dkd25 2500 39.4 (1.55) 715c20dkd33 3300 45.7 (1.80) 715c20dkd47 4700 54.1 (2.13) 715c20dkd68 6800 61.5 (2.42) 715c30dk### 715c30dkt50 y5u 500 30 10.6 26.7 (1.05) 34.5 (1.36) 715c30dkd10 1000 33.0 (1.30) 30.0 (1.18) 715c30dkd25 2500 45.7 (1.80) 715C30DKD33 3300 54.1 (2.13) 715c30dkd47 4700 61.5 (2.42) 715c40dk### 715c40dkt30 y5u 300 40 14.0 22.4 (0.88) 34.5 (1.36) 715c40dkt50 500 26.7 (1.05) 715c40dkt78 780 33.0 (1.30) 715c40dkd10 1000 39.4 (1.55) 715c40dkd16 1600 45.7 (1.80) 715c40dkd25 2500 54.1 (2.13) 715c40dkd33 3300 58.4 (2.30) d max. 8-32nc-2b tapped hole s h max.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
